Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 45)

Programming Control

F8237701

19. Cooldown Enable/Temperature

“Codn” (Models with Heat)

This option allows the owner to enable or disable the

Cooldown Water Temperature option. If enabled, the

owner can also set the cooldown water temperature.

How to Program Cooldown Enable/

Temperature

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the Cold ( ) or the Delicate Cold ( )

keypad until “Prog” appears in the display. Press

the START (enter) keypad and “AtS” will appear

in the display.

3. Press the Cold ( ) or the Delicate Cold ( )

keypad to scroll through the programmable

options until “Codn” appears in the display.

4. When “Codn” appears in the display, press the

START (enter) keypad. A number, or “oFF”, will

appear in the display. The number corresponds to

the current Cooldown Water Temperature value,

and “oFF” appears when cooldown is disabled.

5. Press the Cold ( ) or the Delicate Cold ( )

keypad to change the current status.

NOTE: Cooldown Water Temperature is selectable

between 50° and 160° Fahrenheit (10° and 71°

Celsius). Default temperature value is OFF.

6. Press the START (enter) keypad when the

desired value appears in the display.

NOTE: Refer to option 21 to select Celsius or

Fahrenheit display.

7. Press the START (enter) keypad when the correct

number appears in the display. The next option,

“PtEn”, will appear in the display.

NOTE: To program “PtEn” (Prouction Test Cycle

[on/off]), refer to option 20. To program other

options, refer to the appropriate section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 69 70

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 45