49
F8237701
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Testing Machine and
Electronic Control Functions
This feature allows the owner to run diagnostic tests
on various machine operations without servicing the
machine. The following tests are available:
• Balance Weight Test (Design 1 models only)
• Water Purge Test
• Water Leak Detection Test
The following tests are available on Design 2 models
only:
• Drive Software Version Number
• Drive Parameter Table Version Number
• Drive Type Value
• Drive DC Bus Display Test
How to Enter Diagnostic Testing Feature
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the COLD ( ) or the DELICATE COLD
( ) keypad until “dIAg” appears.
3. Press the START (enter) keypad. Display will
change to “d001” indicating the front end control
software version number test.
4. Press the COLD ( ) or the DELICATE COLD
( ) keypad to scroll through the diagnostic test
options.
How to Start Tests
To start a diagnostic test, refer to the quick reference
chart (Table 13). Press the START (enter) keypad
when the desired test number is displayed. For detailed
information on each test, read the appropriate description.
How to Exit Diagnostic Testing Feature
Press the DELICATE WARM (<) keypad. The display
will return to the previous mode of operation.
Diagnostic (Testing) Mode –
Quick Reference Chart
Test Number Diagnostic Mode Display
“d019”
VFD Balance Weight Test
(Design 1 models)
“bAL”
Drive DC Bus Display Test
(Design 2 models)
“dCb”
“d020” Water Purge Test
“PUrg”
“d021” Water Leak Detection Test
“Ld”
“d022”
(Design 2
models only)
Drive Software Version
Number
“drxx”
“d023”
(Design 2
models only)
Drive Parameter Table
Version Number
“dPxx”
“d024”
(Design 2
models only)
Drive Type Value “dt x”
Table 13
Comments to this Manuals