Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 18)

Programming Control

F8237701

Programming Flowcharts

Entering Manual Mode

Figure 3

CHM1318R

“Prog” - Program cycle information and

other features into the control. Refer to the

Manual Programming flowchart.

“AUdt” - Retrieve audit information for

machine.

1. Press START (enter) keypad.

2. Press Cold keypad or Delicate Cold

keypad to scroll through options.

“Coi1” - Total number of coins #1:

1. Press START (enter) once to read audit.

“rCyC” - Total number of

rapid advance cycles:

1. Press START (enter) once to read audit.

“CyC” - Total number of machine cycles:

1. Press START (enter) once to read audit.

“rSEt” - Reset the control’s programming data

to factory default.

1. Press START (enter) keypad.

“dIAg” - Run diagnostic tests on machine

operations.

1. Press START (enter) keypad. Refer to

Diagnostic Tests flowchart.

“Coi2” - Total number of coins #2:

1. Press START (enter) once to read audit.

“PLSE” - Total number of start pulses.

1. Press START (enter) once to read audit.

Enter Manual Mode.

1. Open top cover

2. Press and hold both Heavy Hot keypad

and Hot keypad.

“rAPd” - Quickly advance through active

cycles.

1. Press START (enter) keypad to begin Rapid

Advance cycle and advance through cycle

steps.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 69 70

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 18