Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 38)

Programming Control

F8237701

Programming Agitate Step

1. When “AgSt” appears in the display, press the

START (enter) keypad. The first Agitate step

programming option will appear in the display.

2. Press the Cold ( ) or the Delicate Cold ( )

keypad to scroll through the programmable

Agitate step options. Refer to Table 10.

NOTE: Agitate Step “AgEn” must be enabled to

scroll through all Agitate Step options.

3. Press the START (enter) keypad when the

desired option appears in the display. The current

status/value will appear in the display. Refer to

Table 10.

4. Press the Cold ( ) or the Delicate Cold ( )

keypad to change the current status/value.

5. Press the START (enter) keypad when the

desired status/value appears in the display. The

next Agitate step option will appear in the

display.

NOTE: To program “drAn” (Drain Step), continue

to next Cycle Segment option. To program other

options, press the Cold ( ) or the Delicate Cold ( )

keypad and refer to the appropriate section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

Programming Drain Step

1. When “drAn” appears in the display, press the

START (enter) keypad. The current status will be

displayed.

2. Press the Cold ( ) or the Delicate Cold ( )

keypad to change the current status.

“on” = Segment is enabled

“oFF”= Segment is disabled

NOTE: Drain must be enabled to activate Extract

step.

3. Press the START (enter) keypad when the

desired status appears in the display. The next

Cycle Segment option, “SPIn”, will appear in the

display.

NOTE: To program “SPIn” (Extract Step),

continue to next Cycle Segment option. To program

other options press the Cold ( ) or the Delicate

Cold ( ) keypad and refer to the appropriate

section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

Agitate

Step

Description Status/Value

“AgEn” Agitate Step

Enable/Disable

“on”/“oFF”

“AdUr” Agitate Duration

(in minutes)

1-30

“HEAt” Heat in Agitate

(If heater is present)

“oFF”, 1 or 2

1 = to target

2 = maintain

Table 10

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 69 70

Comments to this Manuals

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 38

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems HCN020HCF