Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 49)

F8237701

Collecting Audit Information

This feature allows the owner to retrieve audit

information stored in the machine by pressing a

sequence of pads on the control. For an explanation of

the audit options available, refer to Table 12.

How to Enter Audit Feature

There are two methods the owner can use to enter the

Audit Feature.

Entering the Audit Feature by Manual

Mode

1. Control must be in Manual Mode to start. Refer

to Entering the Manual Mode.

2. Press the Cold ( ) or the Delicate Cold ( )

keypad until “AUdt” appears.

3. Press the START (enter) keypad. “CyC” will

appear.

Entering the Audit Feature with the Coin

Vault Open

1. Open coin vault. Make sure top cover is closed.

2. Press the START (enter) keypad.

How to Read Audit Data

1. Use the Cold ( ) or the Delicate Cold ( ) keypad

to scroll through various options until the desired

option is shown in the display. Refer to the Audit

Options List, Table 12, for an explanation of the

audit options available.

2. Once the desired option appears in the display,

press the START (enter) keypad once to start the

audit count. At this point, the display will show

the first four-digit segment of the audit value. If

the audit count is 10,000 or higher, press the

START (enter) keypad again to view the last four

digits of the number.

NOTE: The display can show up to 4 digits at one

time. Audit counts 10,000 or higher are separated

into two 4-digit segments. Each time the START

(enter) keypad is pressed in step 2, the display will

show the next 4-digit segment in the audit value. If

the value is 9,999 or less, only one 4-digit segment

will be shown.

For Example: In the Total Number of Coins #1 option

with “Coi1” shown in the display, the audit has

counted 10,009 coins. Pressing the START (enter)

keypad one time will show “_ _ _ 1” to represent ten

thousand. Pressing the START (enter) keypad a second

time will display “0009” meaning nine. The total

equals “00010009” or 10,009.

3. Press the START (enter) keypad again. The

control will go to the next audit option in the

Audit Options List.

4. To select other audit options, repeat steps 1 – 4.

How to Exit Audit Feature

Press the Delicate Warm (<) keypad.

NOTE: To exit Audit Feature when using Coin

Vault Open method, owner must close coin vault.

Audit Options List

# Display Description

“CyC”

Total # of machine cycles

“rCyC”

Total # of rapid advance cycles

“Coi1”

Total # of coins #1

“Coi2”

Total # of coins #2

“PLSE”

Total # of Start Pulses

Table 12

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 69 70

Comments to this Manuals

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 49

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems HCN020HCF