Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 26)

Programming Control

F8237701

4. Start Pulse Value “PLSE”

This option allows the owner to program the value of

the Start Pulse if used for multiple pulses with an after-

market central card reader or pay system. Refer to

option 5 for additional information.

How to Program Start Pulse Value

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the Cold ( ) or the Delicate Cold ( )

keypad until “Prog” appears in the display. Press

the START (enter) keypad and “AtS” will appear

in the display.

3. Press the Cold ( ) or the Delicate Cold ( )

keypad to scroll through the programmable

options until “PLSE” appears in the display.

4. When “PLSE” appears in the display, press the

START (enter) keypad. There are five digits in

the Start Pulse Value. The fifth digit will appear

in the display and will flash one (1) second on

and one (1) second off. Refer to Figure 11.

NOTE: If the Start Pulse Value is $100.00 or more,

the fifth digit is “1-6”. If the Start Pulse Value is

$99.99 or less, the fifth digit is “0”.

Figure 11

5. Press the Cold ( ) or the Delicate Cold ( )

keypad to increase or decrease the value of the

fifth digit.

NOTE: The Start Pulse Value can be set from 1 to

65,535. The default start pulse value is 25.

6. Press the START (enter) keypad to enter the fifth

digit and display remaining four digits. The

active digit will flash one (1) second on and one

(1) second off.

NOTE: To go back to the current programmable

option without changing the value of the active

digit, press the Delicate Warm (<) keypad.

7. Press the Cold ( ) or the Delicate Cold ( )

keypad to increase or decrease the value of the

active digit and the START (enter) keypad to

enter the value of the digit and advance to the

next digit.

8. Press the START (enter) keypad with the last

active digit. The next option, “PLSn”, will

appear in the display.

NOTE: To program “PLSn” (Start Pulse Mode),

refer to option 5. To program other options, refer to

the appropriate section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

CHM507R

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 69 70

Comments to this Manuals

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 26

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems HCN020HCF