Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 53)

Testing Machine and Electronic Control Functions

F8237701

Drive Software Version Number Test

(Design 2 models only)

This option displays the custom drive software version

number. To start test, control must be in the Diagnostic

Testing Mode. Refer to How to Enter Diagnostic

Testing Feature at the beginning of this section.

To enter, press the START (enter) keypad. The display

will show “drxx” where “xx” is the custom drive

software version number.

To exit the Custom Drive Software Version Number

Test, press the DELICATE WARM (<) keypad. The

control will return to the Diagnostic Testing Mode.

Drive Parameter Table Version Number

(Design 2 models only)

This option displays the custom drive parameter table

version number. To start test, control must be in the

Diagnostic Testing Mode. Refer to How to Enter

Diagnostic Testing Feature at the beginning of this

section.

To enter, press the START (enter) keypad. The display

will show “dPxx” where “xx” is the custom drive

parameter table version number.

To exit the Custom Drive Parameter Table Version

Number Test, press the DELICATE WARM (<)

keypad. The control will return to the Diagnostic

Testing Mode.

Drive Type Value (Design 2 models only)

This option displays the custom drive type value. To

start test, control must be in the Diagnostic Testing

Mode. Refer to How to Enter Diagnostic Testing

Feature at the beginning of this section.

To enter, press the START (enter) keypad. The display

will show “dt x” where “x” is the custom drive type

value. Refer to Table 15.

To exit the Custom Drive Type Value, press the

DELICATE WARM (<) keypad. The control will

return to the Diagnostic Testing Mode.

Production Test Cycle

To Enter Production Test Cycle

1. Be certain control is in Ready Mode and top

cover or coin vault is open.

2. While pressing and holding the Cold keypad with

one hand, press the Quick Hot keypad with the

other hand.

3. When the control enters the Production Test

Cycle, it will first display “S xx” with the “xx”

showing the software version of the front end

control.

4. The control will advance through the sequence of

test steps whenever any key is pressed. Refer to

Table 16 for all tests in the Production Test

Cycle.

Display Drive Type

“dt 1” 2 HP drive

“dt 2” 3 HP drive

“dt 3” 5 HP 280V drive

“dt 4” 5 HP 480V drive

Table 15

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 69 70

Comments to this Manuals

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 53

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems HCN020HCF