Alliance Laundry Systems HCN020HCF Instruction Manual Page 59

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 58
57
F8237701
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Rapid Advance Feature
The Rapid Advance feature allows the owner to
quickly advance through active cycles or advance into
a cycle from the ready mode.
How to Enter Rapid Advance
1. If control is in Ready Mode, control must be put
into Manual Mode. Refer to Entering the
Manual Mode.
2. Press the Cold ( ) or the Delicate Cold ( )
keypad until rAPd” appears in the display.
3. Press the START (enter) keypad. The display will
show cycle time and the START (enter) keypad
LED will flash.
4. Press the START (enter) keypad to start cycle.
NOTE: Door must be closed to start cycle.
How to Enter Rapid Advance During
an Active Cycle
1. Be certain top cover is open and coin vault switch
is closed.
2. While pressing and holding the Heavy Hot
keypad with one hand, press the Hot keypad with
the other hand.
3. Press the Cold ( ) or the Delicate Cold ( )
keypad until “rAPd” appears in the display.
4. Press START (enter) to activate Rapid Advance
cycle.
How to Use Rapid Advance
Control may be in an active cycle or in the Ready
Mode to use the Rapid Advance feature.
While in the Rapid Advance Mode, pressing the
START (enter) keypad will advance the machine to the
next cycle step. The cycle indicator lights will tell
which cycle step the machine is in.
For Example: If the washer is in the first Fill cycle
step, pressing the START (enter) keypad will advance
the washer into the Agitate cycle step.
Continue pressing the START (enter) keypad until the
cycle is completed.
How to Exit Rapid Advance Feature
1. Advance through the cycles until reaching the
Ready Mode.
NOTE: The Rapid Advance option must be turned
on for Rapid Advance to work. Refer to option 21
in Programming Control.
>
Page view 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 69 70

Comments to this Manuals

No comments