Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 28)

Programming Control

F8237701

6. Available Type “AtyP”

This option allows the owner to program when the

control provides an available output for card and

central pay systems.

How to Program Available Type

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the Cold ( ) or the Delicate Cold ( )

keypad until “Prog” appears in the display. Press

the START (enter) keypad and “AtS” will appear

in the display.

3. Press the Cold ( ) or the Delicate Cold ( )

keypad to scroll through the programmable

options until “AtyP” appears in the display.

4. When “AtyP” appears in the display, press the

START (enter) keypad. A number will appear in

the display. This number corresponds to the

current Available Type Value.

5. Press the Cold ( ) or the Delicate Cold ( )

keypad to increase or decrease the current

number to the desired number selected from

Table 3.

6. Press the START (enter) keypad when the correct

number appears in the display. The next option,

“dCYC”, will appear in the display.

NOTE: To program “dCYC” (Default Cycle), refer

to option 7. To program other options, refer to the

appropriate section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

Available Type

Value

Mode(s) in Which Available

Signal is Active

0* Ready Mode only

1 Ready Mode, Partial Vend Mode

2 Ready Mode, End of Cycle Mode

3 Ready Mode, End of Cycle Mode,

Partial Vend Mode

*Factory default setting

Table 3

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 69 70

Comments to this Manuals

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 28

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems HCN020HCF