Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 27)

Programming Control

F8237701

5. Start Pulse Mode “PLSn”

This option allows the owner to program the Start

Pulse Input. The Start Pulse Mode can be used for

after-market central pay or card systems. The central

system sends the start pulse to the Start Pulse Input of

the control to start the cycle. If set for single pulse, one

start pulse from the central system will put the control

in Start Mode. If set for multiple pulses, each pulse

will deduct from the vend price value set up in

option 4 (Start Pulse Value) until the vend is satisfied.

How to Program Start Pulse Mode

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the Cold ( ) or the Delicate Cold ( )

keypad until “Prog” appears in the display. Press

the START (enter) keypad and “AtS” will appear

in the display.

3. Press the Cold ( ) or the Delicate Cold ( )

keypad to scroll through the programmable

options until “PLSn” appears in the display.

4. When “PLSn” appears in the display, press the

START (enter) keypad. “oFF” or a number will

appear in the display. This number corresponds to

the current Start Pulse Mode Programming

Val ue .

5. Locate the desired number in the first column of

Table 2 below.

6. Press the Cold ( ) or the Delicate Cold ( )

keypad to increase or decrease the current

number until correct.

NOTE: To go back to the current programmable

option without changing the current value, press

the Delicate Warm (<) keypad.

7. Press the START (enter) keypad when the correct

number appears in the display.

NOTE: To program “AtyP” (Available Type), refer

to option 6. To program other options, refer to the

appropriate section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

“PLSn”

Start Pulse

Mode Value

Start Pulse

ON/OFF

Single Pulse/

Multiple Pulses

“oFF”OFF OFF

128* ON Single Pulse

192 ON Multiple Pulses

*Factory default setting

Table 2

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 69 70

Comments to this Manuals

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 27

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems HCN020HCF