Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 14)

F8237701

Entering the Manual Mode

For programming, testing, and retrieving information

from the control, it is often necessary to enter the

Manual Mode by following the six simple steps below.

How to Enter the Manual Mode

1. If accessing Diagnostic Tests, be sure the washer

is in the Ready Mode before continuing to step 2.

If the washer is in an active cycle, rapid advance

through the cycle. Refer to the Rapid Advance

Feature. If coins or a card has been entered, refer

to Clear Vend Feature.

2. Open the top cover. Refer to Opening the Top

Cover.

NOTE: The coin vault switch must be closed to

enter Manual Mode.

3. While pressing and holding the Heavy Hot

keypad with one hand, press the Hot keypad with

the other hand.

4. The display will show “rAPd”.

5. Press the Cold ( ) keypad or the Delicate Cold

( ) keypad to scroll through the options until the

desired option appears in the display.

6. Press the START (enter) keypad.

Manual Mode is broken into two groups: Manual

Programming and Manual Rapid Advance. Manual

Programming can only be turned on or off with an

external device. Refer to the appropriate instruction

manual. Manual Rapid Advance can be turned on and

off using an external device or by manual

programming (refer to option 21 of Programming

Control).

By default, all groups are turned “on”.

The manual features available in each group are as

follows (the menu displayed on the display in this

mode is in parentheses).

Manual Programming

Manual Programming (Prog)

Manual Read Audit (AUdt)

Manual Reset (rSEt)

Manual Rapid Advance

Rapid Advance (rAPd)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 69 70

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 14