Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 34)

Programming Control

F8237701

5. Press the Cold ( ) or the Delicate Cold ( )

keypad to select error code.

6. Press the START (enter) keypad when the correct

code appears in the display. The current status

will appear in the display.

7. “oFF” indicates the option is disabled. “on”

indicates the option is enabled. Press the Cold ( )

or the Delicate Cold ( ) keypad to change the

status.

8. Press the START (enter) keypad when the correct

status appears in the display. The next Error Code

Programming option will appear in the display.

NOTE: To program “CyC-” (Cycle Programming),

press the Delicate Warm (<) keypad, then the Cold

() keypad and refer to option 11. To program

other options, refer to the appropriate section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 69 70

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 34