F8237701
48
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Manual Reset
This feature allows the owner to reset the machine
control’s programming data to the factory default
settings by pressing a sequence of pads on the control.
For an explanation of the Factory Default Settings,
refer to Table 1.
How to Enter Manual Reset
1. Control must be in Manual Mode to start.
Refer to Entering the Manual Mode.
2. Press the Cold ( ) or the Delicate Cold ( )
keypad until “rSEt” appears.
3. Press the START (enter) keypad. The control will
be blank until the programming is complete.
Once the program has been reset, the control will
display the next Manual Mode option, “diAg”.
Comments to this Manuals