Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 44)

Programming Control

F8237701

18. Cold Water Temperature “FC”

This option allows the owner to program the cold

water temperature for models equipped with heat.

How to Program Cold Water Temperature

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the Cold ( ) or the Delicate Cold ( )

keypad until “Prog” appears in the display. Press

the START (enter) keypad and “AtS” will appear

in the display.

3. Press the Cold ( ) or the Delicate Cold ( )

keypad to scroll through the programmable

options until “FC” appears in the display.

4. When “FC” appears in the display, press the

START (enter) keypad. A number will appear in

the display. This number corresponds to the

current Cold Water Temperature value.

5. Press the Cold ( ) or the Delicate Cold ( )

keypad to increase or decrease the current Cold

Water Temperature value to the desired Cold

Water Temperature value.

NOTE: Cold Water Temperature is selectable

between 35° and 194° Fahrenheit (2° and 90°

Celsius). Default temperature value is 35°

Fahrenheit (2° Celsius).

NOTE: Refer to option 16 to select Celsius or

Fahrenheit display.

6. Press the START (enter) keypad when the correct

number appears in the display. The next option,

“Codn”, will appear in the display.

NOTE: To program “Codn” (Cooldown Enable/

Temperature), refer to option 19. To program other

options, refer to the appropriate section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

To prevent personal injury, avoid contact

with inlet water temperatures higher than

125° Fahrenheit (51° Celsius) and hot

surfaces.

W748

WARNING

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 69 70

Comments to this Manuals

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 44

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems HCN020HCF