Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 41)

Programming Control

F8237701

12. Supply/Compartment Dispenser

Programming “SUPC” (Design

1 Models Only)

This option allows the owner to choose between the

supply dispenser or compartment dispenser.

NOTE: Supply Dispenser must only be selected if

machine is connected to an external chemical

supply system.

How to Program Supply/Compartment

Dispenser Programming

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the Cold ( ) or the Delicate Cold ( )

keypad until “Prog” appears in the display. Press

the START (enter) keypad, and “AtS” will

appear in the display.

3. Press the Cold ( ) or the Delicate Cold ( )

keypad to scroll through the programmable

options until “SUPC” appears in the display.

4. When “SUPC” appears in the display, press the

START (enter) keypad. The current dispenser

option will appear in the display.

“S” = Supply Dispenser

“C” = Compartment Dispenser (Default setting)

5. Press the Cold ( ) or the Delicate Cold ( )

keypad to change the dispenser type.

6. Press the START (enter) keypad when the

desired dispenser type appears in the display. The

next option, “bALr” (VFD models) or “IrA”

(2 speed models), will appear in the display.

NOTE: For VFD models: To program “bALr”

(Number of Balance Retries), refer to option 13.

For 2 speed models: To program “IrA” (IR Access

[on/off]), refer to option 14. To program other

options, refer to the appropriate section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

13. Number of Balance Retries

“bALr” (Variable Frequency

Drives Only)

This option allows the owner to program how many

times the control will retry balancing the load before

moving into Extract step.

How to Program Number of Balance

Retries

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the Cold ( ) or the Delicate Cold ( )

keypad until “Prog” appears in the display. Press

the START (enter) keypad, and “AtS” will

appear in the display.

3. Press the Cold ( ) or the Delicate Cold ( )

keypad to scroll through the programmable

options until “bALr” appears in the display.

4. When “bALr” appears in the display, press the

START (enter) keypad. The current value will

appear in the display.

5. Press the Cold ( ) or the Delicate Cold ( )

keypad to increase or decrease the current value.

NOTE: The number of balance retries can be set

from 1-7. Default balance retries is 3 for Design 1

models and 1 for Design 2 models.

6. Press the START (enter) keypad when the

desired value appears in the display. The next

option, “IrA”, will appear in the display.

NOTE: To program “IrA” (IR Access [on/off]),

refer to option 14. To program other options, refer

to the appropriate section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 69 70

Comments to this Manuals

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 41

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems HCN020HCF