Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 11)

Machine Operation

F8237701

Signals

There are five options when a signal can be used during

the washer operation. These five options are listed below:

1. End of Cycle Signal

By default, this signal is turned off. If turned on, the

signal sounds for three (3) seconds at the end of a

cycle.

2. Signal On Keypad Depression

By default, this signal is turned on and sounds for

a quarter of a second each time a keypad is pressed.

3. Signal On Coin Input/Card Insertion

By default, this signal is turned on and will sound

for a quarter of a second each time a coin or card

is entered.

4. Signal for Card Removal (Card Models Only)

By default, this signal is turned on and will sound

one (1) second on and one (1) second off when

the control is prompting for card removal.

5. Signal for Start

By default, this signal is turned on and will sound

one (1) second on and one (1) second off for 10

seconds after vend price has been satisfied.

NOTE: Refer to Programming Control to program

signal options.

Changing Cycles

Cycles can be changed anytime during the first Fill

step. After the first fill step, all key presses are

ignored.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 69 70

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 11