Alliance Laundry Systems HCN020HCF Instruction Manual download pdf (Page 40)

Programming Control

F8237701

How to Program Cycle Time “Cnin”

This option allows the owner to program minutes to

the cycle’s display time.

1. Press the Cold ( ) or the Delicate Cold ( )

keypad to scroll through the programmable Cycle

Programming options until “Cnin” appears in the

display.

NOTE: The option “PCtd” Programmable Cycle

Time Display must be programmed “on” to access

the “Cnin” option, refer to option 24.

2. When “Cnin” appears in the display, press the

START (enter) keypad. The first cycle time value

will appear in the display.

3. Press the Cold ( ) or the Delicate Cold ( )

keypad to change the current value.

NOTE: The Program Cycle Time can be set from 0

to 255 minutes. The default value is 0.

4. Press the START (enter) keypad when the

desired cycle time value appears in the display.

NOTE: Programming display time (in minutes)

does not actually change time in the cycle, only to

the displayed cycle time for the user.

NOTE: To program another cycle, repeat Cycle

Programming steps. To program other options,

press the Cold ( ) or the Delicate Cold ( ) keypad

and refer to the appropriate section.

How to Exit Programming Feature

Press the Delicate Warm (<) keypad until the control

returns to Ready Mode.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 69 70

No comments

Alliance Laundry Systems HCN020HCF Instruction Manual Page 40