Alliance Laundry Systems BU170S Service Manual Page 109
- Page / 120
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
70422201R1
107
LED OPL and UniLinc Troubleshooting
63.Electronic Control Testing
Models with RE Control Suffix
This feature allows the owner to run diagnostic tests
on various tumble dryer operations without servicing
the tumble dryer. The tests that are available are shown
in Table 2.
For an overview of the manual diagnostic test feature,
refer to the flowchart on the following page.
How to Enter Testing Feature
1. Enter Manual Mode. Refer to Entering the
Manual Mode.
2. Press the Up ( ) or the Down ( ) keypad until
“
” appears.
3. Press the Start ( ) keypad. Display will
change to “
” indicating the control
software version number test.
4. Press the Up ( ) or the Down ( ) keypad to
scroll through the diagnostic test options.
How to Start Tests
To start a diagnostic test, refer to the quick reference
chart below (Table 2). Press the Start ( ) keypad
when the desired test is displayed. For detailed
information on each test, read the appropriate description.
How to Exit Testing Feature
Press the Back ( ) keypad. The display will return to
Idle Mode.
Table 2
Diagnostic (Testing) Mode - Quick Reference Chart
Display Diagnostic Mode
“” Control Software Version
“” Loading Door Status
“” Lint Door Status
“” Heater Interlock Test
“” Fan Motor Contactor Status ( represents input status, open “” or closed “”
“” Fan Motor Centrifugal Switch Status ( represents input status, open “” or closed “”
“ ” Cabinet High Limit Thermostat Status ( represents input status, open “” or closed “”
“ ” Stove High Limit Thermostat 1 Status ( represents input status, open “” or closed “”
“ ” Stove High Limit Thermostat 2 Status ( represents input status, open “” or closed “”
“” DIP Switch Status
“” ICM Alarm Status
“” ICM Reset Test
“” External Alarm Test
“” Dryer On Temperature Test
“” Thermistor Temperature Test
“” Machine Config #2 Display
“” Machine Config #3 Display
“” Airflow Switch Test
“”Fan Motor Test
“” Damper Motor Test*
“” Reverse Motor Test*
“” Rotation Sensor Test*
“ ” Moisture Sensor Test (Shorted test jumper)*
“
” Moisture Sensor Test (Resistance test jumper)*
* = Tests only shown if enabled by the DIP switch configuration.
- STRIAL TUMBLE DRYERS 1
- Table of 3
- Contents 3
- 70422101R1 4
- Section 1 5
- Safety Information 5
- Safety Warnings and Decals 7
- Tumblers 7
- Section 2 8
- Introduction 8
- Customer Service 10
- Serial Plate Location 10
- How a Tumble Dryer Works 11
- Operation 12
- Temperature Sensor 13
- Modes of Operation 14
- Section 3 15
- Troubleshooting 15
- 1. Motor Does Not Start 16
- 4. Motor Does Not Stop 19
- 6. No Heat Condition 21
- 7. Gas Burner Does Not Ignite 22
- 12.Clothes Do Not Dry 27
- 13.Tumble Dryer Overheating 28
- TMB2357S 34
- TMB2319S 35
- TMB2368S 36
- 21.Cylinder Is “Stained” 39
- Section 4 40
- Call the fire department 41
- TMB2199N 44
- SUPPRESSION 45
- Section 5 46
- Adjustments 46
- 27.Airflow Switch 47
- Pound Models) 47
- 30.Belt Drive 48
- 31.Cylinder Clearance 49
- TMB1786S 50
- 32.Drive Belt Tension 51
- 33.Fan Belt Tension 52
- Section 6 53
- 34.Control Has No Display 54
- 36.Motor Will Not Start/Run 58
- 37.Unit Will Not Heat – Gas 60
- 38.Error Codes 63
- Section 7 64
- 39.Control Has No Display 65
- 40.Door Open Indicator 67
- 41.Motor Will Not Start/Run 70
- 43.Error Codes 75
- Section 8 76
- Is there line voltage 77
- TMB2387S 79
- 45.No Drive Motor Rotation 80
- LED OPL Error Display: E Cab 83
- Is there 24 volts AC 85
- 48.Airflow Errors 87
- LED OPL Error Display: E FnCs 89
- 50.Close Door Indication 91
- 51.Moisture Sensor Error 93
- Figure 9 95
- Figure 10 96
- (Refer to Figure 11) 97
- Figure 12 98
- Machine Basket Removed 99
- Figure 13 100
- 58.Fan Motor Contactor Error 101
- TMB2383S 102
- 59.Rotation Sensor Error 103
- Rotation Sensor Error 104
- 60.Shorted or Open Thermistor 105
- Shorted or Open Thermistor 106
- SEE VOLTAGE 107
- OPTION DIAGRAM 107
- PROGRAMMING DIP SWITCHES 108
- (SEE INSTALLATION MANUAL 108
- FOR SWITCH DETAILS.) 108
- 63.Electronic Control Testing 109
- 70422201R1 110
- Diagnostic Test Descriptions 111
- Production Test Cycle 116
- 64.Diagnostic Testing 117
- Diagnostic Menu 117
- Test Menu 117
- Test Cycle Chart 118
- Inputs Outputs Menu 119
- Alarms Menus 120
- Machine ID Menu 120
Related products and manuals for Electric laundry dryers Alliance Laundry Systems BU170S
(23 pages)
(136 pages)
(74 pages)© 2020, manymanuals.com. All rights reserved. | 1.806 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals