Programming Control
19
F8238301
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Flowcharts
Entering Manual Mode
>
>
>
>
“rAPd” - Quickly advance through active
cycles.
1. Press START (enter) keypad to begin Rapid
Advance cycle and advance through cycle
steps.
“AUdt” - Retrieve audit information for machine.
1. Press START (enter) keypad.
2. Press NORMAL/40C ( ) keypad or
PERM PRESS/40C ( ) keypad
to scroll through options.
“Coi1” - Total number of coins #1:
1. Press START (enter) once to read audit.
“rCyC” - Total number of rapid advance cycles:
1. Press START (enter) once to read audit.
“rSEt” - Reset the control’s programming data
to factory default.
1. Press START (enter) keypad.
“dIAg” - Run diagnostic tests on machine
operations.
1. Press START (enter) keypad. Refer to
Diagnostic Tests flowchart.
“Prog” - Program Cycle Information
and other features into the control.
1. Refer to the Manual Programming flowchart.
“Coi2” - Total number of coins #2:
1. Press START (enter) once to read audit.
“PLSE” - Total number of start pulses.
1. Press START (enter) once to read audit.
“CyC” - Total number of machine cycles:
1. Press START (enter) once to read audit.
CHM1333R
Enter Manual Mode.
1. Open top cover
2. Press and hold both NORMAL/90C ( ) keypad
and PERM PRESS/90C ( ) keypad.
Comments to this Manuals