Alliance Laundry Systems SCU020JLF Instruction Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 109
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F8238301
12
Opening the Top Cover
To manually program the control, the top cover must
be opened. Opening and closing the top cover trips a
switch which allows access to various programming
options. Once opened, the top cover may either be left
open, and then closed after programming, or it may be
closed immediately.
The top cover is located on the top of the machine.
1. Unlock top cover.
2. Slide top cover forward slightly to move notches
away from the pegs on the front of the cabinet.
3. Lift the top cover up. To completely remove, lift
top cover away from both top cover hinges. Refer
to Figure 2.
After opening, or opening and closing the top cover,
the operator has 4 minutes and 15 seconds to begin
programming. If the appropriate Select Cycle Pads
have not been pressed in that time, the control will not
accept operator programming. Should this happen,
opening and closing the top cover will once again trip
the switch which allows access to the programming
options.
Figure 2
CHM1357R
1 Top Cover Lock 3 Top Cover Hinge
2 Top Cover 4 Peg
CHM1357R
1
2
4
3
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 108 109

Comments to this Manuals

No comments