Alliance Laundry Systems SCU020JLF Instruction Manual download pdf (Page 33)

Programming Control

F8238301

6. Available Type “AtyP”

This option allows the owner to program when the

control provides an available output for card and

central pay systems.

How to Program Available Type

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the NORMAL/40C ( ) or the PERM

PRESS/40C ( ) keypad until “Prog” appears in

the display. Press the START (enter) keypad and

“AtS1” will appear in the display.

3. Press the NORMAL/40C ( ) or the PERM

PRESS/40C ( ) keypad to scroll through the

programmable options until “AtyP” appears in

the display.

4. When “AtyP” appears in the display, press the

START (enter) keypad. A number will appear in

the display. This number corresponds to the

current Available Type Value.

5. Press the NORMAL/40C ( ) or the PERM

PRESS/40C ( ) keypad to increase or decrease

the current number to the desired number

selected from Table 3.

6. Press the START (enter) keypad when the correct

number appears in the display. The next option,

“dCYC”, will appear in the display.

NOTE: To program “dCYC” (Default Cycle), refer

to option 7. To program other options, refer to the

appropriate section.

How to Exit Programming Feature

Press the PERM PRESS/60C (<) keypad until the

control returns to Ready Mode.

Available Type

Value

Mode(s) in Which Available

Signal is Active

0* Ready Mode only

1 Ready Mode, Partial Vend Mode

2 Ready Mode, End of Cycle Mode

3 Ready Mode, End of Cycle Mode,

Partial Vend Mode

*Factory Default Setting

Table 3

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 108 109

Comments to this Manuals

No comments

Alliance Laundry Systems SCU020JLF Instruction Manual Page 33

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems SCU020JLF