Alliance Laundry Systems STED17*H Instruction Manual Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
50
501506
Power Fail Reset rPF
NUMBER TO
ENTER IN STEP 6
POWER FAIL RESET TIME
000 - 127
Turned OFF
Cycle will be saved for a minimum of six years
128 Cycle information will not be saved
129 1 minute without power before cycle is lost
130 2 minutes without power before cycle is lost
131 3 minutes without power before cycle is lost
132 4 minutes without power before cycle is lost
133 5 minutes without power before cycle is lost
. . . add one minute for every number up to
255 127 minutes without power before cycle is lost
CHART 8
How to Read
Chart 8
Use this chart to set the amount of time for Power Fail
Reset.
The chart range begins at 0 and ends at 255.
Numbers entered between 0-127 turn off the option. If
a number in this range is entered, the current cycle
status will be saved for up to six years. When power
is restored, the cycle will begin where it was
interrupted. If (128) is entered in step 6, cycle
information will not be saved if power fails. If (129) is
entered in step 6, the current cycle will be saved in
the Electronic Control for up to one minute. If power
is not restored within one minute, the control will
revert back to Ready mode when power is restored.
If (130) is entered, two minutes will be added to
Power Fail Reset and so on for a maximum of (255)
or 127 minutes.
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 72 73

Comments to this Manuals

No comments