Alliance Laundry Systems STED17*H Instruction Manual download pdf (Page 46)

501506

18. NO HEAT Vend Price “FPr”

This option allows the user to set the NO HEAT cycle

vend price.

NOTE: This option is directly related to option 20

(Coin Value “COI”). If the coin value is set for U.S.

currency, and the coin drop accepts only quarters,

the coin value should be set for “025.” Therefore,

each time a quarter is entered into the coin drop,

the vend price will decrease 25 cents.

How to Set the NO HEAT Vend Price

1. Control must be in Special Mode. Refer to

Section VII.

2. While pressing and holding the HIGH TEMP

pad with one hand, press the MED TEMP pad

with the other hand. Programmable option

number 1 (Audio Signal “SIg”) will appear in

the VFD,

Figure 60

DRYING

DOOR OPEN

COOL DOWN

PRICE

TIME REMAINING

INSERT COINS

PUSH START

C146IE1A

Figure 60

3. Press the LOW TEMP (+) pad or the NO

HEAT (–) pad to scroll through the

programmable options until “FPr” appears in

the VFD,

Figure 61

DRYING

DOOR OPEN

COOL DOWN

PRICE

TIME REMAINING

INSERT COINS

PUSH START

C164IE1A

Figure 61

4. When “FPr” appears in the VFD, press the

START pad. The current number of coins

required to fulfill the NO HEAT vend price will

appear in the VFD.

5. Press the LOW TEMP (+) pad or the NO

HEAT (–) pad to increase or decrease the

current number of coins displayed in the VFD

to the desired number of coins,

Figure 62

NORMAL

HIGH

TEMP

PERM

PRESS

MED TEMP

DELICATES

LOW

TEMP

TUMBLE

HEAT

START

Press this pad to

scroll ahead or

increase (+) values

Press this pad to

scroll back or

decrease (-) values

Press this pad to

choose (enter) selected

options or values

C147IE1A

Figure 62

6. When the correct number of coins appears in

the VFD, press the START pad to enter the

corrected number. The next programmable

option “FCL” will appear in the VFD.

NOTE: To program “FCL” (NO HEAT Cycle Time),

see the following page. To program other options,

refer to the appropriate section.

How to Exit Programming Feature

1. Be sure service door has been opened and

closed. Refer to Section VI.

2. While pressing and holding the HIGH TEMP

pad with one hand, press the MED TEMP pad

with the other hand. The control will revert

back to the “Ready” mode. See

Figure 3

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 72 73

Comments to this Manuals

No comments

Alliance Laundry Systems STED17*H Instruction Manual Page 46

Comments to this Manuals

Related products and manuals for Washer dryers Alliance Laundry Systems STED17*H