Alliance Laundry Systems STED17*H Instruction Manual Page 16
- Page / 73
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
15
501506
Section V
Electronic Control Special Features
Programming the Electronic Control
The Electronic Control allows the dryer owner to
program special features. Cycle and vend information
may be programmed and displayed by opening and
closing the service door and then pressing
combinations of SELECT CYCLE pads on the
Electronic Control keypad.
For details on programming cycle and vend
information, refer to “
Programming the Electronic
Control
,” Section VIII.
Collecting Audit Information
With the Electronic Control, the dryer owner is able to
access valuable audit information by opening and
closing the service door and then pressing various
sequences of SELECT CYCLE pads on the Electronic
Control keypad. The Electronic Control will record and
display coin vault openings, coins entered, service
door openings, total dryer cycles, total NO HEAT
cycles, special vend options, power failures,
downloads, and others.
For detailed information on audit features, refer to
“
Collecting Audit Information
,” Section IX.
Testing Machine and Electronic Control
Functions
Special programmable diagnostic features built into the
Electronic Control allow the owner to test specific
information with the dryer in and out of an active cycle.
By opening and closing the service door and then
pressing various sequences of SELECT CYCLE pads,
the owner may perform the following tests:
· Diagnostic Test
· Dryer-On Temperature Test
· Thermistor Temperature Display Test
· Coin Vault Opening Test
· Service Door Opening Test
· Coin Drop Input Test
For detailed information on running diagnostic tests,
refer to “
Testing Machine and Electronic Control
Functions
,” Section X.
Sales Floor Feature
The Electronic Control dryer has a built-in sales floor
feature used to display all the LED lights, the status
words, and the three digits with the colon and decimal
point. This function is designed to show potential
customers the high-tech features of the Electronic
Control.
For detailed information on using the Sales Floor
feature, refer to Section XI.
Rapid Advance Feature
This feature allows the user to quickly advance
through an active dryer cycle or advance into a cycle
from the “Ready” mode. This feature is useful when
tests must be performed immediately on a dryer in an
active cycle. In this case, the user can quickly
advance the cycle to the end, perform the required
tests, then return the dryer to the active cycle.
For detailed information on using the Rapid Advance
feature, refer to Section XII.
Clear the Electronic Control Vend Feature
This feature allows the user to return the Electronic
Control back to “Ready” mode if coins have been
entered but the full vend price has not been satisfied.
See
Figure 3
.
For more information on using the Clear Vend feature,
refer to Section XIII.
- Electronic 1
- Model Identification 3
- Table of Contents 4
- Section I 6
- Section II 8
- Section III 10
- Section IV 12
- FABRICS AND TEMPERATURES 13
- Section V 16
- Section VI 18
- Section VII 20
- Section VIII 22
- 1. Audio Signal “SIg” 23
- How to Read 24
- Chart 1 “SIg” 24
- 2. Normal Vend Price “nPr” 25
- Week “SPA” 26
- CHART 2 (END) 30
- Figure 18 31
- Figure 19 31
- Figure 20 31
- Figure 3 31
- 5. Special Vend A, NO HEAT 32
- Price “AFP” 32
- Normal Time “AnL” 33
- Time “AFL” 34
- 8. Special Vend A, Start Hour 35
- 9. Special Vend A, End Hour 36
- 10. Normal Cycle (HIGH, MED 37
- LOW) Time “nCL” 37
- 11. HIGH TEMP Cool Down Time 38
- 12. HIGH TEMP Temperature 39
- 13. MED TEMP Cool Down Time 40
- 14. MED TEMP Temperature 41
- 15. LOW TEMP Cool Down Time 42
- 16. LOW TEMP Temperature 43
- 17. Additional Time “Add” 44
- Added Time Value Chart “Add” 45
- 18. NO HEAT Vend Price “FPr” 46
- 19. NO HEAT Cycle Time “FCL” 47
- 20. Coin Value “COI” 48
- C147IE1A 49
- 22. Power Fail Reset “rPF” 50
- Power Fail Reset “rPF” 51
- How to Program the Control 52
- Configuration “CFg” 52
- (minutes) “CIn” 54
- (hours) “CHr” 55
- 26. Set Real-Time Clock (day) 56
- (date) “CdE” 57
- (month) “COn” 58
- (year) “CYr” 59
- Collecting Audit Information 60
- How to Exit Audit Feature 61
- C177IE1A 63
- Service Door Opening Test 64
- Coin Drop Input Test 64
- Section XI 66
- Section XII 68
- Section XIII 70
- Section XIV 72
Related products and manuals for Washer dryers Alliance Laundry Systems STED17*H
(46 pages)
(8 pages)
(18 pages)© 2020, manymanuals.com. All rights reserved. | 2.370 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals