Alliance Laundry Systems STED17*H Instruction Manual download pdf (Page 48)

501506

20. Coin Value “COI”

This option allows the user to set a specific numerical

value for a coin entered. For example, in the United

States the coin value for one quarter would be

measured in cents (25). Therefore, the coin value

entered for one quarter would be 025.

If the Normal Vend Price (option 2) is set for 3 coins,

the Coin Value is set for “025,” and the decimal point

is turned on, the vend price for a normal heated cycle

will be “.75.”

How to Program the Coin Value “COI”

1. Control must be in Special Mode. Refer to

Section VII.

2. While pressing and holding the HIGH TEMP

pad with one hand, press the MED TEMP pad

with the other hand. Programmable option

number 1 (Audio Signal “SIg”) will appear in

the VFD,

Figure 66.

DRYING

DOOR OPEN

COOL DOWN

PRICE

TIME REMAINING

INSERT COINS

PUSH START

C146IE1A

Figure 66

3. Press the LOW TEMP (+) pad or the NO

HEAT (–) pad to scroll through the

programmable options until “COI” appears in

the VFD,

Figure 67

DRYING

DOOR OPEN

COOL DOWN

PRICE

TIME REMAINING

INSERT COINS

PUSH START

C166IE1A

Figure 67

4. When “COI” appears in the VFD, press the

START pad twice. The current coin value will

appear in the VFD.

5. Press the LOW TEMP (+) pad or the NO

HEAT (–) pad to increase or decrease the

current coin value to the desired amount,

Figure 68

NORMAL

HIGH

TEMP

PERM

PRESS

MED TEMP

DELICATES

LOW

TEMP

TUMBLE

HEAT

START

Press this pad to

scroll ahead or

increase (+) values

Press this pad to

scroll back or

decrease (-) values

Press this pad to

choose (enter) selected

options or values

C147IE1A

Figure 68

6. When the correct coin value appears in the

VFD, press the START pad to enter the

corrected number. The next programmable

option, “dCS,” will appear in the VFD.

NOTE: To program “dCS” (Default Cycle Status),

see the following page. To program other options,

refer to the appropriate section.

How to Exit Programming Feature

1. Be sure service door has been opened and

closed. Refer to Section VI.

2. While pressing and holding the HIGH TEMP

pad with one hand, press the MED TEMP pad

with the other hand. The control will revert

back to the “Ready” mode. See

Figure 3

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 72 73

Comments to this Manuals

No comments

Alliance Laundry Systems STED17*H Instruction Manual Page 48

Comments to this Manuals

Related products and manuals for Washer dryers Alliance Laundry Systems STED17*H