Alliance Laundry Systems STED17*H Instruction Manual download pdf (Page 43)

42

501506

16. LOW TEMP Temperature

“LdE”

This option allows the user to set the maximum

temperature in the LOW TEMP cycle.

How to Program LOW TEMP Temperature

“LdE”

1. Control must be in Special Mode. Refer to

Section VII.

2. While pressing and holding the HIGH TEMP

pad with one hand, press the MED TEMP pad

with the other hand. Programmable option

number 1 (Audio Signal “SIg”) will appear in

the VFD,

Figure 54

.

DRYING

DOOR OPEN

COOL DOWN

PRICE

TIME REMAINING

INSERT COINS

PUSH START

C146IE1A

Figure 54

3. Press the LOW TEMP (+) pad or the NO

HEAT (–) pad to scroll through the

programmable options until “LdE” appears in

the VFD,

Figure 55

.

DRYING

DOOR OPEN

COOL DOWN

PRICE

TIME REMAINING

INSERT COINS

PUSH START

C162IE1A

Figure 55

4. When “LdE” appears in the VFD, press the

START pad. A three-digit number will appear

in the VFD.

NOTE: The number appearing in the VFD is the

current number that was selected from

Chart 5

on

this page.

5. Locate the desired three-digit number in the

first column of

Chart 5

.

6. Press the LOW TEMP (+) pad or the NO

HEAT (–) pad to increase or decrease the

current three-digit number to the desired three-

digit number from

Chart 5

,

Figure 56

.

NORMAL

HIGH

TEMP

PERM

PRESS

MED TEMP

DELICATES

LOW

TEMP

TUMBLE

NO

HEAT

START

Press this pad to

scroll ahead or

increase (+) values

Press this pad to

scroll back or

decrease (-) values

Press this pad to

choose (enter) selected

options or values

C147IE1A

Figure 56

7. Press the START pad when the correct three-

digit number appears in the VFD. The next

programmable option, “Add,” will appear in the

VFD.

NOTE: To program “Add” (Additional Time), see

the following page. To program other options,

refer to the appropriate section.

LOW TEMP Temperature “LdE”

LOW TEMPERATURE VALUE CHART

VALU FAHRENHHEIT TEMP CELSIUS TEMP

000 100°F 38°C

001 105°F 41°C

002 110°F 43°C

003 115°F 46°C

004 120°F 49°C

005 125°F 52°C

006 130°F 54°C

CHART 5

How to Exit Programming Feature

1. Be sure service door has been opened and

closed. Refer to Section VI.

2. While pressing and holding the HIGH

TEMP pad with one hand, press the

MED TEMP pad with the other hand. The

control will revert back to the “Ready” mode.

See

Figure 3

.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 72 73

Comments to this Manuals

No comments