Alliance Laundry Systems STED17*H Instruction Manual download pdf (Page 26)

501506

3. Special Vend A, ON/OFF Days

of Week “SPA”

This option allows the user to set the start day and

stop day of a special vend.

Special Vend A is used to interrupt the standard vend

cycles for special occasions. The special vend can be

programmed to start at a specific time or day of the

week and end on another.

The owner may also turn the Special Vend A option

on or off if desired.

How to Program Special Vend A Days of

Week “SPA”

1. Control must be in Special Mode. Refer to

Section VII.

2. While pressing and holding the HIGH TEMP

pad with one hand, press the MED TEMP pad

with the other hand. Programmable option

number 1 (Audio Signal “SIg”) will appear in

the VFD,

Figure 15

DRYING

DOOR OPEN

COOL DOWN

PRICE

TIME REMAINING

INSERT COINS

PUSH START

C146IE1A

Figure 15

3. Press the LOW TEMP (+) pad or the NO

HEAT (–) pad to scroll through the

programmable options until “SPA” appears in

the VFD,

Figure 16

DRYING

DOOR OPEN

COOL DOWN

PRICE

TIME REMAINING

INSERT COINS

PUSH START

C149IE1A

Figure 16

4. When “SPA” appears in the VFD, press the

START pad. A three-digit number will appear

in the VFD.

NOTE: The number appearing in the VFD is the

current number that was selected from

Chart 2

beginning on the following page.

5. Locate the desired three-digit number in the

first column of

Chart 2

on the following pages.

6. Press the LOW TEMP (+) pad or the NO

HEAT (–) pad to increase or decrease the

current three-digit number displayed in the

VFD to the desired three-digit number,

Figure 17

NORMAL

HIGH

TEMP

PERM

PRESS

MED TEMP

DELICATES

LOW

TEMP

TUMBLE

HEAT

START

Press this pad to

scroll ahead or

increase (+) values

Press this pad to

scroll back or

decrease (-) values

Press this pad to

choose (enter) selected

options or values

C147IE1A

Figure 17

7. Press the START pad when the correct three-

digit number appears in the VFD. The next

programmable option, “AnP,” will appear in the

VFD.

NOTE: To program “AnP” (Special Vend A Normal

Price), see option 4. To program other options,

refer to the appropriate section.

How to Exit Programming Feature

1. Be sure service door has been opened and

closed. Refer to Section VI.

2. While pressing and holding the HIGH TEMP

pad with one hand, press the MED TEMP pad

with the other hand. The control will revert

back to the “Ready” mode. See

Figure 3

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 72 73

Comments to this Manuals

No comments

Alliance Laundry Systems STED17*H Instruction Manual Page 26

Comments to this Manuals

Related products and manuals for Washer dryers Alliance Laundry Systems STED17*H