Alliance Laundry Systems CABINET HARDMOUNT UC125VNV Service Manual download pdf (Page 79)

F232203 77

Troubleshooting

20. Excessive Vibration and/or Noise During Spin

There is excessive

vibration and/or

noise during a spin

cycle.

Has the

machine been

loaded

improperly?

Always make sure that full loads are used. Never wash partial

loads.

Do not mix various laundry items together in the same wash

(e.g., do not wash towels and sheets together).

Avoid using laundry bags.

Yes

Has the machine

been installed

improperly?

Make sure that the washer-extractor is anchored to a flat, level

surface with the proper depth of concrete.

Tighten all anchor bolts and nuts. Make sure that they are of

the correct size and grade.

Make sure that the washer-extractor is grouted properly.

Refer the installation manual that was supplied with the machine

for exact installation specifications.

Do the

bearings

require

replacement?

Check the bearings' noise factor.

Lift up on the basket at the front of the tub. Check for any up

and down play that would indicate bearing wear.

Replace the bearings as needed.

Yes

CHM431S

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 109 110

No comments

Alliance Laundry Systems CABINET HARDMOUNT UC125VNV Service Manual Page 79