Alliance Laundry Systems CABINET HARDMOUNT UC125VNV Service Manual download pdf (Page 76)

74 F232203

Troubleshooting

17. Compartment 2 of Supply Dispenser Not Flushing Completely

Dispenser Illustration

Compartment 2 of the

supply dispenser is not

flushing completely.

Is there low

water pressure

(i.e., less than 30

psi) to the supply

dispenser?

Cut a 3/4-inch by 1/2 inch notch out of the bottom of the

water deflector in compartment 2 of the supply dispenser.

Refer to the

Dispenser Illustration

NOTE: If the water pressure is corrected to factory

specifications, the notch must be plugged to avoid

splashing.

As an alternative, install a hose clamp onto one of the hoses

connecting to the top of the vacuum breaker and tighten the

hose clamp slightly. Refer to the Vacuum Breaker

Illustration.

NOTE: If the water pressure is corrected to factory

specifications, the hose clamp must be removed.

Yes

CHM433S

CHM366S

Notch

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 109 110

No comments

Alliance Laundry Systems CABINET HARDMOUNT UC125VNV Service Manual Page 76