Alliance Laundry Systems SX18BVPA7 Specifications download pdf (Page 58)

Installation

9002106

Out-of-Balance Switch

Figure 44

The out-of-balance switch is mounted on the upper

right side on the back of the control panel. There is a

window around the probe of the switch that is mounted

on the movable part of the machine.

When the machine goes out of balance by overloading

or uneven distribution of the linen, the out-of-balance

switch will interrupt this action to prevent damage to

the machine.

IMPORTANT: To guarantee good functioning, the

probe should be centered horizontally and

vertically at 1/3 from the bottom of the tilt window

(when machine drum is empty).

Automatic Lubricator

Only for 75-200 Pound Models

Figure 45

The bearing house of the machine is equipped with a

lubricating device, refer to Figure 45, which

automatically lubricates the bearing during one year.

Upon delivery of the machine, this lubricator has been

brought into use. When replacing, please put on the

matching screw, refer to Figure 45, in the foreseen

opening of the lubricator to activate.

CFS501N

1 Window

2 Probe

CFS502N

1 Lubricating Device

2 Screw

Ignoring this instruction will inevitably

cause damage to the bearings and void

the warranty!

W492

WARNING

1 2 ... 53 54 55 56 57 58 59

No comments

Alliance Laundry Systems SX18BVPA7 Specifications Page 58