Alliance Laundry Systems SX18BVPA7 Specifications download pdf (Page 46)

Installation

9002106

Removing the Transport Block

To prevent damage during transportation, machine has

been equipped with a transport block. To remove,

proceed as follows:

1. After machine has been placed on level ground,

remove service panels and back panel.

2. For 18 and 30 pound models, at rear of machine,

lift at bottom of motor and remove transport

block if present. Refer to Figure 34.

Figure 34

IMPORTANT: Do NOT lift motor by the pulley.

3. For 18 and 30 pound models, remove the panel

braces. Refer to Figure 30.

4. For 33 and 40 pound models, remove the

transport brackets. Refer to Figure 31.

Figure 35

5. Replace all panels removed.

CFD26N

1 Transport Block (Remove)

The machine must never be activated

before removing the transport block.

W618

WARNING

CFD26N

18 AND 30 MODELS

CFD543N

1 Transport Brackets

FRONT

REAR

33 AND 40 MODELS

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 58 59

No comments

Alliance Laundry Systems SX18BVPA7 Specifications Page 46