Alliance Laundry Systems 1336 Specifications download pdf (Page 58)

Fault Display and Troubleshooting Information

F232120

Fault Display and Troubleshooting Information

This section provides information to guide users in

understanding drive fault conditions and general

troubleshooting procedures for Allen-Bradley drives.

Included is a listing and description of the various

drive faults with possible solutions, when applicable.

For any questions regarding fault conditions, consult

with the factory.

Each drive is equipped with a fault indicator light

which illuminates when a fault condition exists.

Fault Code Identification

A-B 160

When a fault occurs, the fault indicator light will

illuminate on the front cover of the A-B 160 drive, as

shown in Figure 36. To view the fault type, the PKM

or CopyCat Keypad must be installed. The A-B 160

fault number is located in parameter #07. Refer to

PKM or CopyCat Keypad installation and operation.

The PKM will flash the display when a fault is present

as shown below (i.e., Fault Code 22). Cross reference

the number in Table 30 for fault identification and

possible corrective action.

In addition, A-B 160 Series C fault codes are stored in

a fault buffer with the capability to store up to three

fault codes. If more than three faults are identified, the

least recent fault is deleted to make room for the

additional fault. “Fault Buffer 0” is the most recent

fault. The faults are viewed using a PKM as shown

below. Refer to PKM installation and operation.

The fault parameters are identified as follows:

“Last Fault” Parameter #7 Most Recent

“Fault Buffer 0” Parameter #17 Most Recent

(same as

Parameter #7)

“Fault Buffer 1” Parameter #18 –

“Fault Buffer 2” Parameter #19 –

Fault

Parameter

Fault

Code

07 22

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments

Alliance Laundry Systems 1336 Specifications Page 58

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems 1336