Alliance Laundry Systems 1336 Service Manual Page 87

  • Download
  • Add to my manuals
  • Print
  • Page
    / 95
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 86
F238006 87
Section 5 Service Procedures
To reduce the risk of electrical shock, fire, explosion, serious injury or death:
Disconnect electrical power to the washer-extractor before servicing it.
Close the gas shut-off valve to the washer-extractor (when applicable) before servicing it.
Never start the washer-extractor with any guards/panels removed.
Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer-extractor is properly grounded.
W461R1
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
38. VACUUM BREAKER
If the machine’s vacuum breaker is leaking, verify
that water pressure to the machine is between 30
and 85 psi. If the water pressure is between 30 and
85 psi, repair the vacuum breaker using a vacuum
breaker repair kit (refer to the machine’s parts
manual for vacuum breaker repair kit part
numbers).
39. DOOR GASKET REMOVAL AND
INSTALLATION
Turn off power to the machine.
Removal
Depress the door gasket and roll it away from the
door. Refer to Figure 25.
Installation
Depress the door gasket and roll it toward the door
in a star-shaped pattern. Refer to Figure 26.
Figure 25
PHM1944S
Door
Gasket
Figure 26
PHM1945S
Door
Gasket
Page view 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 93 94 95

Comments to this Manuals

No comments