Alliance Laundry Systems SWD439C Specifications download pdf (Page 20)

Installation

800941

Step 9: Plug In the Unit

Refer to sections on Electrical Requirements and

connect the unit to an electrical power source.

Figure 17

Figure 18

Step 10: Check Installation

Refer to Installer Checklist on the back cover and

make sure that unit is installed correctly.

Moving Unit to a New Location

To prevent damage while moving the washer, the

shipping materials MUST BE reinstalled.

Reinstallation of Shipping Materials

Remove front access panel by removing two screws.

Place the shock sleeves on all four shock absorbers.

Refer to Figure 19.

Insert hooked end of shipping brace into the open slot

of the motor mount. Attach with bolts and lockwashers.

Refer to Figure 19.

Reinstall front access panel.

Figure 19

Refer to step 7 for proper procedures whenever the

washer is moved.

D373I

1 Power Cord (Four-Wire)

D254I

ELECTRIC UNIT

Connect to 40 Amp circuit.

D254I

GAS UNIT

Plug cord into separately fused 20 Amp circuit.

H336I

1 Shock Sleeves

2 Motor Mount

3 Bolts and Lockwashers

4 Hooked End of Shipping Brace

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 69 70

No comments

Alliance Laundry Systems SWD439C Specifications Page 20