Alliance Laundry Systems SWD439C Specifications download pdf (Page 19)

Installation

800941

Step 7: (Washer Only) Remove the Shock

Sleeves and Shipping Brace

Remove front access panel by removing the two

screws.

Remove bolts and lockwashers from shipping brace

with 9/16 in. wrench and remove brace. Remove shock

sleeves by pulling on the yellow rope.

Remove label from front side of front access panel and

place on backside of front access panel.

NOTE: The shipping brace, bolts, lockwashers and

shock sleeves should be saved and MUST be

reinstalled whenever the unit is moved more than

four feet. Do not lift or transport unit from front or

without shipping materials installed.

Store the shipping materials in the bag provided in the

accessories bag. Save materials for use whenever the

unit is moved.

NOTE: The shipping materials MUST be reinstalled

whenever the unit is moved. Refer to Moving Unit

to a New Location section for proper instructions on

reinstalling the shipping materials.

Reinstall front access panel.

Figure 14

Step 8: Wipe Out Inside of Washer Drum

and Dryer Drum

Before using the washer and dryer for the first time,

use an all-purpose cleaner, or a detergent and water

solution, and a damp cloth to remove shipping dust

from inside the drums.

Figure 15

Figure 16

H336I

1 Shock Sleeves

2 Motor Mount

3 Bolts and Lockwashers

4 Hooked End of Shipping Brace

SWD451N

SWD452N

SWD451N

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 69 70

No comments

Alliance Laundry Systems SWD439C Specifications Page 19