Alliance Laundry Systems 30 Pound Capacity Operations Instructions Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operating Instructions
70380401 (EN)
10
Error Codes
To reduce the risk of electric shock, fire, explosion, serious injury or death:
Disconnect electric power to the tumble dryer before servicing.
Close gas shut-off valve to gas tumble dryer before servicing.
Close steam valve to steam tumble dryer before servicing.
Never start the tumble dryer with any guards/panels removed.
Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the tumble dryer is properly grounded.
W002R1
WARNING
Display Definition Corrective Action
OP
Open thermistor error
Check thermistor. Replace if inoperative.
Check wiring diagram between control and thermistor.
Refer to wiring diagram for proper wiring.
Check control. Replace if inoperative.
SH
Shorted thermistor error
Check thermistor. Replace if inoperative.
Check wiring between control and thermistor. Refer to
wiring diagram for proper wiring.
Check control. Replace if inoperative.
AF - 1
Airflow switch closed when cycle
started
Check airflow switch. Replace if inoperative.
AF - 2
Airflow switch failed to close after cycle
started
Check airflow switch. Replace if inoperative.
AF (Flashing)
Bouncing Airflow Switch
Check airflow switch to ensure that it is properly
aligned and securely mounted in the mounting bracket.
Make sure airflow switch can open and close freely.
Check installation and make sure there is adequate
airflow.
Make sure exhaust is not blocked.
Clean the lint screen.
Replace airflow switch if inoperative.
AF (Solid)
Airflow Switch Closed when Resuming
Cycle
Allow up to 20 seconds for this condition to clear.
Check if airflow switch opens at end of cycle.
Replace airflow switch if inoperative.
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments