Alliance Laundry Systems CHM166C Installation Manual download pdf (Page 14)

Programming

F232133

2a to 2b

This jumper configuration changes the fill temperature

for the rinses from cold to warm for all cycles. Refer to

Figure 15.

Figure 15

10a to 10b

This jumper configuration changes the water level for

the wash segment from low to high for all cycles.

Refer to Figure 16.

Figure 16

7. After the jumpers have been set, replace the

control module cover.

8. Close and lock the top cover.

9. Reconnect power to the machine.

Programming the Digital Coin Meter

Verify the software version to be a single-coin acceptor

or a dual-coin acceptor by checking the label on the

coin counter board located in the control module

behind the coin meter face. Refer to Figure 17.

For single-coin acceptors, the software version

identification code is “ONECOIN V2.62”; for

dual-coin acceptors, the code is “TWOCOIN V2.85”.

Figure 17

0b 0 0a

2b 2 2a

4b 4 4a

8b 8 8a

10b 10 10a

12b 12 12a

B164R

1 Left Program Button

2 Right Program Button

3 Coin Counter Board

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Alliance Laundry Systems CHM166C Installation Manual Page 14