Alliance Laundry Systems CHM166C Installation Manual download pdf (Page 11)

Programming

F232133

Setting the Jumpers Without Circuit

Board

NOTE: The following procedures must be

performed by a qualified electrician familiar

with the construction and operation of this type

of machinery.

1. Disconnect power to the machine.

2. Unlock and raise the top cover.

3. Remove the control module cover.

4. The mechanical timer is located in the middle of

the control module. The odd-numbered side of

the timer is used to change the duration of

individual cycle steps. Refer to Figure 2.

Eleven possible jumper configurations are

available for changing the cycle time. Refer to

Table 3.

Figure 2

1b 1 1a

3b 3 3a

5b 5 5a

7b 7 7a

9b 9 9a

11b 11 11a

13b 13 13a

15b 15 15a

17b 17 17a

19b 19 19a

Mechanical Timer Cycle Time Options

Jumper Setting PreWash Wash Rinse 1 Rinse 2 Rinse 3

Final

Spin

Cycle

Time

None 4 8 1.5 1.5 1.5 4 27.5

1a to 3a 4 4 1.5 1.5 1.5 4 23.5

1a to 3a to 3b -- 4 1.5 1.5 1.5 4 18.5

1a to 3a to 3b to 5b -- 4 1.5 1.5 1.5 2 16.5

1a to 3a to 5a* 2 4 1.5 1.5 1.5 4 21.5

1a to 3a to 5a to 5b 2 4 1.5 1.5 1.5 2 19.5

1a to 3b -- 8 1.5 1.5 1.5 4 22.5

1a to 3b to 5b -- 8 1.5 1.5 1.5 2 20.5

1a to 5a 2 8 1.5 1.5 1.5 4 25.5

1a to 5a to 5b 2 8 1.5 1.5 1.5 2 23.5

1a to 5b 4 8 1.5 1.5 1.5 2 25.5

*Factory Setting

Table 3

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments

Alliance Laundry Systems CHM166C Installation Manual Page 11

Comments to this Manuals

Related products and manuals for Washing machines Alliance Laundry Systems CHM166C