Alliance Laundry Systems UL20A130 Specifications download pdf (Page 20)

Operation Instructions

1800001

Operating Instructions

The machine is suitable for ironing linen such as

sheets, pillow cases and table linens.

Start

1. Push green "Tension" button: the circulation

pump starts to work, the burner starts.

2. Set to desired temperature.

IMPORTANT: The working temperature varies

depending on the fabric being ironed. It must be at

least 302

F (150

C) but never to exceed 365

(180

C).

3. Push the green "Start" button to start machine.

Green pilot comes on. Bed is pressed against

roller, exhaust is started, and roll starts to turn.

For best results, adjust speed.

Stop

1. Push red stop button, bed opens and roll stops at

once. The machine remains on temperature.

IMPORTANT: When pushing emergency stop

button, all motors and the burner are cut off and

bed opens automatically. Restarting is only possible

by resetting the emergency stop button (turn

clockwise) and pushing the power/tension button

again. Touching the finger guard will stop the roll

at once, but temperature will remain constant. To

start again, push start button.

IMPORTANT: When the finger guard is tripped

the bed remains pressed against the roll. It is

strongly recommended to start the roll as soon as

possible or to stop the machine completely.

Temperature Setting

NOTE: Set temperature to read in degrees

Fahrenheit.

SET

: Push to display the set point valve. The set point

can be changed within 3 seconds with the "UP" or

"DOWN" button. The control will automatically

switch back to normal operating mode within 3

seconds; the last entered set point sill stay in memory.

: Used to increase the set point value, as well as the

parameter when in programming. Pushing the button

for several seconds will accelerate the change rate.

DOWN:

Used to decrease the set point valve, as well

as the parameter when in programming. Pushing the

button for several seconds will accelerate the change

rate.

LED "OUT"

: Status light of the output. Blinks when

in set point display/change mode or during

programming.

FWF50N

POWER/TENSION

ON/OFF

START BUTTON

ROLL

EMERGENCY

STOP

SPEED

ADJUSTMENT

STOP BUTTON

ROLL

GAS BURNER

OFF

TEMPERATURE

ADJUSTMENTS

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments

Alliance Laundry Systems UL20A130 Specifications Page 20

Comments to this Manuals

Related products and manuals for Finishers Alliance Laundry Systems UL20A130