Alliance Laundry Systems H264I Specifications download pdf (Page 14)

Installation

800536

Step 3: Connect Drain Hose to Drain

Receptacle

Remove the drain hose from its shipping position on

the rear of the washer by unhooking the hose from the

retainer clamp or by removing the shipping tape.

IMPORTANT: Drain receptacle must be capable of

handling a minimum of 1-3/8 inch (3.5 cm) outside

diameter drain hose.

Figure 5

Standpipe Installation

Place the drain hose into the standpipe.

Remove the beaded tie-down strap from accessories

bag and place around standpipe and drain hose and

tighten strap to hold hose to standpipe. This will

prevent the drain hose from dislodging from drain

receptacle during use.

Figure 6

H139I

1 Retainer Clamp

H139I

H138I

1 Standpipe 2" (5.08 cm) or 1-1/2" (4 cm)

H138I

RECOMMENDED

HEIGHT

24" TO 36"

(61 TO 91.44 cm)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 69 70

No comments

Alliance Laundry Systems H264I Specifications Page 14