Alliance Laundry Systems 1336 Specifications download pdf (Page 57)

Allen-Bradley 160-Series AC Drives

F232120R7

Figure 33

Removing the RPA

1. Remove power from machine at main

disconnect. Delay approximately three minutes.

2. Insert small screwdriver into slot, pry back, and

pivot module out. Avoid bending or twisting

contact pins located underneath center portion of

the module. Refer to Figure 32.

3. Reinstall the status display cover.

Connector Cable

To remove the cable from the drive or the CopyCat

Keypad, pull back on the plastic housing of the cable

connector. Refer to Figure 34. The connector cable has

a locking mechanism to ensure the cable will not be

accidentally disconnected.

Figure 34

CAUTION

It is required that the RPA be earth grounded

to improve noise immunity and to guard the

CopyCat Keypad against hazardous DC bus

potential voltages.

W667

U168M

Remote

Program

Adaptor

WARNING

A hazard of electric shock exists if the RPA

is not tied to earth ground. Failure to

provide an earth ground connection can

result in severe personal injury or death.

W668

U/T1

V/T2

/T3

DC-

C+

ALLEN-BRADLEY

U169M

Cable Connector

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 111 112

No comments

Alliance Laundry Systems 1336 Specifications Page 57